Guest
Guest
 | Subject: By jove it runs !!!  Fri Mar 19, 2010 9:21 pm | |
| First engine run of the James Cook racing 2010 Formula Bantam BTMGPRX010 race bike  https://www.youtube.com/watch?v=FZ3lQA3DOto Short snippet of Alan Mallory practice day https://www.youtube.com/watch?v=K9sU2jO4eRI Short snippet of Nick Bramley practice day https://www.youtube.com/watch?v=9LR_-M1NkhI Short snippet of Mike Redhead practice day https://www.youtube.com/watch?v=9nYMXwvXVWM James |
|
ray davis
Number of posts : 68
Registration date : 2006-12-08
| | Subject: love to see them but .. Sat Mar 20, 2010 1:57 pm | |
| Hi James
prompted me to try find another solution to getting around the ban on u tube in china!
Ray | |
|
mjpowell
Number of posts : 1074
Localisation : Lincoln England
Registration date : 2006-12-09
| | Subject: Re: By jove it runs !!! Mon Mar 22, 2010 7:42 am | |
| Excellent clips James! I see your set of Tom Miller yokes and are they RG125 forks and whats the disc? The bike is looking good!
Nicks bike sounds wicked!! | |
|
Guest
Guest
| | Subject: Re: By jove it runs !!! Mon Mar 22, 2010 8:29 am | |
| Mike, Your are correct on the yokes and the forks, the Disc (and Hub) is a Honda CB100 with a Grimeca caliper, Frankly I think this setup is as good as my new VFR800 |
|
Derek
Number of posts : 1065
Age : 63
Localisation : worcestershire
Registration date : 2007-06-15
| | Subject: Re: By jove it runs !!! Mon Mar 22, 2010 10:43 am | |
| Hi james love the tank, and the colour scheme, same as my logo, thanks for the offer of help but in the end I managed to do it all myself, how satisfying, I think it,s called perseverance, a pre requisit for bantam racing, as im sure you all know.  sadly JAMES  I only have vision no sound so can not hear it, but it looks great. (what would we all do without Tom miller). O" Mike yes' yes' Pembrey- for sure I'm trying, I will check on the dates again.  regards DEREK | |
|
mjpowell
Number of posts : 1074
Localisation : Lincoln England
Registration date : 2006-12-09
| | Subject: Re: By jove it runs !!! Tue Mar 23, 2010 5:34 am | |
| James what size is the disc about 250mm? Mines a 260mm RG disc, was std stainless then when on to a PFM disc and have yet to try a cast iron one which i have had made. A lot of banty riders seem to go massive disc - thick spokes - and to wide a rim, the front wheels must weigh a ton!! | |
|
Guest
Guest
| | Subject: Re: By jove it runs !!! Thu Mar 25, 2010 7:33 am | |
| I believe its not even as big as that 240mm I think |
|
Sponsored content
| | Subject: Re: By jove it runs !!! | |
| |
|
